Doro 530 Twin Cordless Phone "flashing base" Questions

...base for about 10 seconds (until the IN USE light starts to flash), then release the /HANDSET LOCATOR button. Immediately press /HANDSET LOCATOR while the IN USE light is still flashing. (The light ...

...base keeps flashing 88 .renewed battery but unit is still flashing 88. My unidentifiable 9480 base keeps flashing 88 after replacing new battery Either the base is defective and not keeping the ...

...flashing stops, re-register the handsets to the base. Re-Register a Handset to the Base 1. Remove Handset Battery. 2. Reconnect battery while holding down "*" and "#" key. 3. Then press the right ...

...flashing base at us and doesn't work. we've tried to register it to the base according to instructions.. it flashes registering but then stops and doesn't register.. it keeps flashing base. what is ...

...base shows "Uniden" which also keeps on flashing every 2 seconds. None of the buttons work. Tried putting in battery in the base compartment, but the same result. If I keep the handphone in base ...

My handset displays "New Voice Mail" and the base displays 00. Handset displays "New Voice Mail" and the VMWI flashes continuously and the Base shows 00 and says "You have no messages". How do I ...

Not registered i have the binatone G11 twin une phone working another on screen said not registered and no working hello there i think this is because you need to register the second handset with the ...

...power. 4.charge light on main base should be flashing. 5.while the light is flashing press & hold the hash # button on the additional hand set only until it says registration complete & its all

...flashing base 1, cannot go to setup menu, not changed pin code, turned off and on, removed batteries, turned off base unit, waited 20-30secs for all of above and still handset is flashing base 1. ...