Hotpoint WMA30 Front Load Washer "drum jammed force" Questions

...drum it sticks and needs extra force to get it past the obstruction. This results in horrendous noise on spin cycle. How do you get behind the drum?? YOUR DRUM BEARING HAS GONE SOUNDS AS THOUGH THE ...

...come adrift and cause this or some article of clothing has jammed behind the back of the drum and forced between the tub and the front door gasket. It could also be a siezed tub back bearing.. ...

...drum on my Hotpoint WMA454 appears to be jammed, it only moves a small distance without resistance. The belt is attached and ok and there is no noise as if it is the bearings, just won't move. What ...

...is because the drum's not turning. can any one please help me. By the way its a hotpoint washer about 3 years old. it sounds like you've got an item of clothing jammed between the inner and outer ...

drum away from the rear bearing! & jammed iself! only way now is to disconnect power & water & undo cabinet to inspect it! Cheers rob. I had an issue with my Electrolux top loading washing

...drum is now quiet smelly, i have found the filter but i dont know how to remove it,maybe you could help,i have lost the manual also. The filter will turn but wont come out it really needs to be ...

drum,,, you need to relpace the door switches now,,, there both broken!!!! opening this door must have taken some force to do it with the washer still washing they should not have let you unlocked the

...drum does spin but not forcefully and I believe its because the water is in the tub...can you help? Hi from retired Englishman in SW France, I would gently suggest as a first step that you clean the ...

...drum side wire clamp was a bit of a challenge. My model had a hook on one end of the wire so that it came apart when removed. I think this made it much easier. Some models don't have the hook so you ...

...drum and jammed it solid.one way to see if it is a small object like a stone or screw which may work is to undo the screw on the pulley,this is normally a torx screw,you will have to undo in an ...