...control board and the water level pressure switch. To remove the top panel (with the washer unplugged), take out the screws at the very back of the top panel and slide the panel back and then pick it ...
to hold the control lock button down for 3~5 sec to unlock the board. To remove the board, the bezel pops off from around the control. Once removed you can easily access the screws to remove the board
Question about Hotpoint Washing Machines
...needs to be replaced, It will be best to remove the unit - control unit which can be a coupled one with the board and customer control pad.Check this link for tips to remove: Control
...control board. Disconnect and clean every wiring harness connector and terminal on the machine control board. Ensure that all connections are good and tight. Reconnect the wiring harness connectors ...
...control board. 3. Remove the interface connector and pull the control knob off. 4. Lay entire panel face down on a soft surface (such as some folded towels). 5. Remove the user interface cover (this ...
...control board and the central control unit (main control board). These error codes can sometimes be caused by a power surge or glitch through the electrical lines. Try unplugging the washer to ...
...control board. 3. Remove the interface connector and pull the control knob off. 4. Lay entire panel face down on a soft surface (such as some folded towels). 5. Remove the user interface cover (this ...
control board. The washer recently shorted out and I couldn't get the door open. I finally figured out how to get the door open. Next step is to get the cabinet off. I was told the motor control board
...control board that is behind the buttons you press to opperate it? you dont need to remove the front of the washer to get to the control board. remove the top panel by removing the screws at the top ...
907 questions posted
Usually answered in minutes!
886 Questions
541 Questions
485 Questions
500 Questions
151 Questions