Hotpoint Aquarius WD640 Front Load Washer/Dryer "change element" Questions

Ad

Question about Hotpoint Washing Machines

1 Answer

change heater element on a Hotpoint Ultima WMA66P How do you remove the heater element, I have taken the wires off but fail to see how it is secured to the machine I am assuming you have accessed the ...

Ad

...change the water temp to off). I have never changed an element on a washing machine so any help will be most appreciated. Many thanks, Sam Sam. The small nut and bolt which protrudes between the ...

Ad

Question about Bosch Washing Machines

1 Answer

...spin, rinse. Does anyone know where I can get internal digrams from to see if the element can be changed without removing the drum? Thanks in advance you should never have to remove drum to

Question about Hotpoint Washing Machines

3 Answers

element and is filled with heat sensitive crystals that change their electrical resistance according to the temperature. This error also indicates a poor connection to the main PCB. It is high time to

Question about Kenmore Washing Machines

1 Answer

...change as an ovens element. Most times they are cracked and easy to tell if broke, otherwise could be a computer issue. Heating element break easily with all the contracting and expanding they do. So ...

...washer is giving me problem .when I tune on it trip the power .But when I take off the element themostart plug off it don't trip can I change the element give more detail, submit picture of ...

Question about Indesit Washing Machines

2 Answers

...change the element on a hotpoint wm62 washing machine ????? I do not believe that there is an element in this machine. You get hot water from you tap. There is only a heating element in a dryer. If ...

Question about Kenmore Washing Machines

1 Answer

...element will be under the drum. If the element gets 240V and does not heat up, the element needs changes. If there is no voltage to the element, check continuity on the thermostats. If any of the ...

Question about Maytag Washing Machines

1 Answer

change heating element on performa (maytag) dryer< and need to know how to get to it. the top will lift up put a putty knife in 2inches from the side and push in and release the tabs the element is in

Question about Bosch Washing Machines

1 Answer

...change the element again just yet! Bearings seem OK (very little play) and there's a lot of clearance above the heater with the washer empty, though one part is lower than the rest. A picture of ...

Not finding what you are looking for?
Hotpoint Aquarius WD640 Front Load Washer/Dryer Logo

907 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...