Hotpoint Aquarius WD63 Front Load Washer/Dryer "wd440 clean water pump" Questions

...WD440 Washer/Dryer How do I Clean the Filter? remove bottom rear panel. you will see a large diameter hose going from tub to pump. undo this hose at the tub end - lots of water will come out. filter ...

...WD440 Washer/Dryer and the drawer for the washing powder overflows with water whenever we turn it on. I've cleaned the drainage filter at the base of the unit (white plastic thing with a ball from a ...

...WD440 washer dryer which keeps filling up with water even when the power is off. We of course pump the water out but it keeps on refilling. Your water valve is bad. The water valve is the part where ...

...wd440 my washer dryer wont dry. it runs the cycle (or sounds like it is) and my washing is damp and cold when the cycle ends. ta Find the pipe that comes out of the bottom of the drum, this may ...

...WD440 hasn't been able to dry for a while - technician couldn't fatham it either...now it leaks from front of machine (know its front as dust behind machine is dry - lol!) Any ideas on what i can try ...

...clean these and put it back together and it will work once again. The solution from the Guest on feb 29th is spot on. I happened to have the Hotpoint engineer out this morning and he done the same ...

WD440 and it has recently stopped working by the time saver and power on/off buttons flashing. They start flashing when the machine starts to drain. Water pumps to and from the drum fine, I have had a

pump all the water out and stop the wash cycle your on open the door then disconnect the mains supply for 10-15 mins then turn it back on and hope the software fixes itself otherwise there is an issue

...WD440 is blocked. The dry programme gets near the end of the programme and then fills with water again! Now it won't spin, has retained water. Took the top off but cannot find a way of getting to the ...

Wd440 not spinning and flashing lights My machine will spin but not on fast spin. As soon as its supposed to the machine stops and the on/off and rinse hold buttons flash. I've cleaned the ...