how to take the top off a wahing machine At rear of machine at the top, on both sides are small screws or bolts. Remove these and the top of the machine should slide back and remove.
Question about Zanussi Washing Machines
...remove the back cover from the machine? I removed the 3 screws at the top and at the back, but it still doesn"t come off. Thanks removed screws from top / bottom and sides? then pull top pcover back ...
...Hotpoint WMA40 you need to remove the screws at the kick panel on the lower front panel by the floor, then the top cover screws are under top cover inside machine remove these and top will lift ...
...remove the top lid of the machine. Loosen motor mounts and swing motor up and remove belt from motor. Now remove belt from pulley from the top of machine. Reverse the order starting from the top to ...
ld code can see blockage at drain inside machine i need to remove top of machine to get into behind drum area the rear of the machine needs to be removed in order to remove the lid
Question about Hotpoint Washing Machines
...remove the top panel. Run the machine as per normal, but be careful as the electrics will now be exposed, you will be able to see where the water is leaking from and be able to repair/replace ...
...remove top from wash machine so I can replace spin safety switch Gallery series, commercial heavy duty super capacity sound silencer 3/4 hp On these machines there are no screws holding the top down, ...
...not lock so i can't use the machine. I would like to disable the lock so I can use the machine two screws to remove top panel. 2 clips to remove cabinet . remove lid switch . of course unplug
...Once removed pop the two metal brackets out with a flat screwdriver, and unplug the lid switch. At this point you should be able to remove the entire top to have access to the inside. Good
183 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions
