Motorola Mobility RAZR V3 "t5" Questions

how can i change rebon to change the flex or ribbon of your phone' you need this tools' T6, T5, T4. twizzer.

...the correct tools are purchased for the job in hand. At the very least, you will require a Torx T5 screwdriver. Do NOT attempt to use a small Allen key or filed down screwdriver, you will only ...

...ebay! look for one with water damage it will be the cheapest. you will nedd minimal tools a torx t5 t6 and a phillips at most. browse youtube for take apart razr and you should find tons of videos ...

...this problem). any help would be appreciated. well dirt under key pad or water ect would need t4 t5 star tools take it apart clean it well ok thx ...

...I took off the rubber pegs on the inside of the flip-screen to reveal the screws. They need a T5 screwdriver head (tiny star shape). I removed all 4 from that side. I then 'forced' the back ...

...hole covers on the screen. Typically they are located at the corners of the screen. Take a Torx T5 or T6 screwdriver, and start unscrewing till you get to the screen. There, check the ribbon ...

...cover, put everything back together and everything works fine now! Try it - good luck! You need a T5 torx bit to remove the two screws holding on the back

... (http://www.formymobile.co.uk/v8disassembly.php) It will only take a few minutes but you do need a T5 torx screwdriver which can be found at a hardware store by itself or in a kit containing ...

...to the internet for motorola razor v3 dismantling Things You'll Need: Small flathead screwdriver, T5 screwdriver T6 screwdriver, SIM card (any make or model) Read more: How to Take Apart a Moto

...but usually it goes white after a few seconds i have taken apart the screen by removing the 4 t5 screws and tried to push the screen connector back down but its still solid white could that