Hotpoint Aquarius WMA42 Front Load Washer "wma 10" Questions

fault code or engineers reset for beko washing machine wma 756s serial no 05-100 905-06 please can you send me fault code for beko wma 665 w serial no 05-103296-10 thankyou

WMA 54 Hotpoint Aquarius washing machine gets to a certain point in the cycle and stops the lights then flash in sequence. I cannot get the door open and have tried different cycles but the same thing

washing machine instructions for beko eco care wma 1510 s when does the fabric softner go into the machine when using program 10?

...wma 10? Remove the lower rear panel of washer. Locate and remove the large black hose fastened to bottom of drum. Remove and clean plastic filter inside the hose, reassmble and test for leaks. Have ...

...wma 10 hotpoint washing machine so does not spin either any clues to where the filter is??????? please help Most likely something stuck in the pump. Remove front panel and hose that goes into pump. ...

...wma 10 w washing machine has stoped working, it made a bang and then triped the mains switch, i opened it up and found a wire going in to the suppressor was slightly burnt and a little black so i ...

I have beko 91442 lx and can get it to start. All lights etc on. Thought it might be child lock but can seem to get it on or off. What can I do please Different combination of buttons. i think it ...

WMA 10 Hotpoint firsy edition We've discovered dark slime/stains on the rubber at the door and even more at the other side of the rubber where the flap is. Any suggestions how to get rid of it? elbow ...

...wma 10 which is a couple of years old. The door seal now leaks when the machine goes onto a spin? Is there anything that you can suggest? Sounds like there is too much water left in the drum as it ...

...wma 34 aquarius washing machine ,it is 10 yrs old ,yhe problem is it wont finish a cycle,most of the lights come on all at once and it keeps draining water and not taking in enough for a full load of ...