...cold water or no hot water - The fill valve has two coils, one for the hot water and one for the cold water. It is possible that one of the coils can fail and you loose that filling ability. If the ...
...hot or cold water and is connected You need good water pressure on hot for these machines to work, gravity fed systems may not be enough. I had to attach a pump to mine to improve the hot water ...
...thats backward and be determined by touching hoses while filling on warm setting and see which hose feels hot. On the back of washer they where they connect hot goes on the bottom and cold on ...
...hose connection, then connect to cold only. if two hose connections, then connect at ramdom. put on rinse cycle. if hot water comes in, then connections are the wrong way round and just reverse ...
Question about GE Washing Machines
...at washer unit end. Water supply has good pressure and hot water into washer is ok, but cold is very slow still. There is a filter screen at the washer inlets for hot and cold water. Clean the ...
...hot and cold hoses to your washer so that the cold water feeds the hot water connection and the hot water feeds the cold water connection. Turn off both hot and cold water faucets. Set the washer for ...
...attach both hot and cold water hoses to the branches of the "Y" and connect both hot and cold water hoses to your washing machine. Please post back if you need further assistance. Regards, ...
hot and cold so presume no heating element ?) All Hotpoint washers have heater element regardless of whether they are cold fill only, or hot and cold fill. if 2 connections at rear, then it is hot and
...connect the hot and cold fill hoses to a single cold water supply (external link to 4Washerhelp spares). The washing machine will then work OK. Simply screw the Y-Piece onto the tap, and then screw ...
669 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
151 Questions
