Hotpoint WMA64 Front Load Washer "common reason unbalanced washing machine" Questions

...common cause is you filled the washer with too much clothing. I could not find maytag service man that could fix our unbalanced problem leaving the clothes wet and telling me to just not use max ...

...reason it attempts a very quick spin at the beginning of a normal wash cycle. Can you reset it somehow? Does anyone have any other ideas? Thanks alot. Have you checked to see that the waste is not ...

...common reason for a 4E error is a blocked or kinked water supply hose. Follow these checks: 1. Check that the water tap connected to the washing machine is open to full. 2. Check that there are no ...

...common causes include: Power issues: Check to see if the washer is properly plugged in and the outlet has power. Water supply problems: Make sure the water supply valves are turned on and the hoses ...

Washing Machine Does Not Fill If the washer doesn't fill, the water inlet screens may be blocked. Clean or replace them. (Check your owner's manual for the location of the screens; they're

...common problems with washing machines, however, is that they won't spin. Usually this is caused by an issue that easily can be fixed, but other times it can be more serious. In some cases, just ...

common these days because manufacturers have built in certain protections, but it's still something that can happen. To differentiate between the two, observe when the problem occurs, if it's during a

...common reason a top load washer will stop mid-cycle is because the load of wash is unbalanced; more weight is on one side of the wash tub. This might happen most often during a "spin" part of the ...

...Unbalanced load; Washer is not on a concrete subfloor. This may sound a little silly, but washers situated on a wooden subfloor will vibrate the floor below (much like a person jumping up and down in ...