Question about HP Pavilion Computers & Internet
mx75 monitor turns off when I awaken my computer I always leave my HP mx75 monitor power button on when I turn off the computer (I do this because the spring behind the monitor's on/off button is ...
My computer is only 2 years old. I recently moved and hooked my computer back up yesterday. I turned it on and the monitor says no service input and automatcily goes into sleep mode. What do you think
...monitors keep going bad? I fixed mine once already with a new video card, and I'm having the same problem again two months later? The monitor doesn't work. If you replaced the video card, then the ...
Question about HP Pavilion Computers & Internet
...to continually go in sleep mode? The problem you are encountering is not your monitor but your computer. There is a problem with your CPU unit. To know this info in true then try this.,remove
Just moved and trying to set up the computer. Monitor light keeps flashing with a blank screen Check that the "data" cable between the monitor and your computer's video-card is tightly connected at ...
going to sleep hi, my monitor goes to sleep as soon as i switched the computer on. (if you have an orange light) Turn off your computer and unplug all of your devices, printer, scanner etc... Only ...
monitor turning on and off My computer monitor keeps turning on and off every second. I can not use it because it keeps going on and off. It may be a coinsedence, but this problem started right after ...
Question about HP Pavilion Computers & Internet
...VOLUME? I DOTN SEE THE VOLUME BUTTON This monitor has no volume. The volume is controlled by the computer connected to the monitor, and not controlling the monitor itself. To regulate volume on ...
...to verify that the computer is working? If the monitor is in fact bad, it would be better to replace it than to try a repair. New LCD monitors are quite inexpensive and you'll gain lots of desk
...light needs to be replaced. If it still shows black try another data cable from the monitor to the computer If that still did not work as the machine is turned on remove the data cable connector
377 questions posted
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,195 Questions
1,096 Questions
608 Questions