ViewSonic VA520 15" Flat Panel LCD Monitor "monitor red green blue" Questions

...Monitor ID Bit 2 5 Gnd Ground 6 RGND Red Ground 7 GGND Green Ground 8 BGND Blue Ground 9 KEY Key (No pin) 10 SGND Sync Ground 11 ID0 IN Monitor ID Bit 0 GND=Color; NC=MonoMonitor ID Bit 0 12 ID1 or ...

...monitor..... red does not exist any more. I have gone back to the factory reset but to no avail. I have also tried to bring up the red using the monitor adjustment buttons located under the monitor ...

...monitor sync master 753 vga connector broken, what is color scheme for new connector Hi, Colour scheme to re wire is as follows... Pin Name Function 1 23 45 67 89 10 11 12 13 14 15 RED GREEN BLUE n/c ...

...monitor are distorted. can you tell me how to reset to defaults -- ie, give me the % that I should set for brightness, contrast, red, blue, green, etc. thanks Brightness-50% Contrast-50% Blue, Green, ...

...Monitor ID bit 2, reserved since E-DDC Pin 5 GND Ground (HSync) Pin 6 RED_RTN Red return Pin 7 GREEN_RTN Green return Pin 8 BLUE_RTN Blue return Pin 9 KEY/PWR formerly key, now +5V DC Pin 10 GND ...

...red and green colors This usually means the red or green or both primary color module is bad. Monitors come with 3 primary color module controllers and they use them in various combinations to make ...

...green to offset OR it may indicate that you have lost the red gun all together. If this is an older monitor and you are considering repair... cost points say it is cheaper to buy a monitor ~$60 ...

...red green blue lines when i power it on it the lcd does power on but i have lines no picture just bright red red green and blue lines going up and down any help would be nice My opinion something ...

...Monitor ID - Bit 2 5 Ground 6 Red Ground 7 Green Ground 8 Blue Ground 9 [KEY] 10 Sync Ground 11 Monitor ID - Bit 1 12 Monitor ID - Bit 0 13 Horizontal Sync 14 Vertical Sync 15 N/C (Reserved) ...

...red green blue,when i connect the two the screen is black and white.do i need a new cable or is their another way? red green and blue is a component connection. your tv probably also has an RCA ...