ViewSonic VG900 19" Flat Panel LCD Monitor "screen resolution change sleep" Questions

...going to sleep and the pc goes dead They say that the maximum resolution for this monitor is 1024x768 - when it gets a signal with higher resolution, it shuts off. Try to change the screen

...screen. If this all is not working i think you have a problem with the resolution you have set in windows. In this case you have to reboot your computer to safe mode, change your display to a low ...

screen resolution on monitor I use a ViewSonic VG1930wm monitor with my Dell lap top. Every time my computer goes to sleep, the ratio on the monitor automatically defaults back to 1280 x 720 (normally

...screen and the monitor goes to sleep. If I put it into VGA mode, it will come up OK. But once I change any resolution or number of colors, it imediately goes to sleep. I would appreciate any help you ...

Screen Resolution (Windows 7). When the window pops up, click Settings (if on Windows XP, if on Windows 7 skip to next step). From this window, change the resolution back to the basic 800 x 600 screen

...screen resolution monitor giving error message.. I changed the resolution in the control panel to the highest resolution (1024x768). The monitor immediately gave me an error message, something about ...

screen resolution changes after wake up from sleep reinstall diaplay driver from control panel

Screen Resolution to 1024 * 768 (this did not show as a supported resolution for the monitor, but there is a way around this as you will see; it will still let you adjust the resolution slider to this

...resolution change or screen save power down and flashes orange but you must unplug and plug the monitor power cord, before it comes back on. other than that, it works great, and every time power is ...

...screen will pop on for a few seconds then go off again HELP!! same problem ... changing cables won't help ... Have you tried the monitor on another computer? If so, and it works, the issue is with ...