Panasonic AG-DVC30 Mini DV Digital Camcorder "camera not turn" Questions

camera having error WARNING FOCUS LOCK Camera was not used for 3 weeks and suddenly it had error warining focus lock pls help Hello there! Focus ring lock means that some how the focus ring is not ...

distorted audio into AG_DVC7 Digital camera from Mixer Aux send My Ag_DVC7 Digital Camera will not receive clean audio from the Aux Send from the mixer. (Mackie Mixer). If I have one person speaking, ...

turn back on. I'm not a technician, but we just sent our AG-DVC7 to a repair shop. For $45.00 they told me the CCD Unit and the CCD board were bad. they wanted $250.00 for parts alone. The camera is 8

turn it on. the display and playback of my old footage works fine but the picture is totally black. any Ideas THIS MEANS THAT CAMERA PART HAS A PROBLEM BUT NOT THE PLAYBACK PART.MUST BE A CAMERA BOARD

...camera (by the lense) that says manual/sevro, turn it to sevro and your zoom button should work again. (obviously when it's set to manual you need to turn it by hand) - do not turn it by hand when it ...

...camera will not turn n with either a fully charged battery or with the power cord. Sounds like the power supply has a problem. You could take it into a camera shop and see what your options are. ...

...turn your other settings in the menu while in camera mode to ext, both or chain. Ext. mode, means pushing record on the camera makes the hard drive record, but not to tape, Both means that both tape ...

turn on the camera , the LCD screen comes on and says "tape not inserted". But immediately I open the tape compartment, power will turn off from the camera. When I put the tape in it and try

...turn off camera...and it seems there is no light accion on the back off the camera where you insert the P2 cards. Any ideas? Thanks a lot Wow I have not any ideas on all these problems, all I do know ...

...turn on my camera. Before recording I have turn the camera on for about 15 minutes for the lines to disappear. A technician told me that the power pulse board needs to be replaced. I have been trying ...