bake ignitor switch and the oven still doesn't ignite. What do we do now? Is the gas valve easy to replace on a gas oven? if its not the oven ignitor itself then its usually the gas valve in the range
...oven turns on, (lights) by itself , what may cause this? This oven has an electric thermostat control and it is most likely shorted out or the contacts are melted shut......replace the control switch ...
...oven temp. sensor itself that has gone bad. To solve this issue start by checking the oven temp. sensor for 1100 ohms, if the rating is more then that then check the control and door switch and ...
Question about KitchenAid Kitchen Ranges
...oven go on by itself and i cant shut it off unless i closs circuit breaker oven goes on by itself,can not shut it off using off switch. Ghosts.... Okay, at this point some trouble shooting is needed. ...
oven simply won't heat up to clean itself. Any ideas or should I replace the unit since it is 13 yrs old. Top part and oven work fine - it's just the self=cleaning that doesn't work anymore. thanks It
...Oven switches off after 10-15 minutes, then back on again after it has cooled down, obviously the overheat stat is working otherwise it wouldnt switch itself off, what part is it that I need to ...
...light. Be sure the timer (right most knob) is set back to MAN (manual) after cleaning in order for the oven to work. It should be on the top corner of the instument panel or on or in the door
...there is a small one on the pc board but that would be to protect electronic components not the main power for the oven. Ovens typically rely on the protection of the circuit itself - fuse or
Question about Frigidaire Kitchen Ranges
...oven door is opened Make sure there is power present at the socket. If not then the wire must have bad connector some where between the socket to the switch or may be the switch itself is defect. If ...
Question about Amana Kitchen Ranges
...timer & clock buttons, clock, hours +-, mins +-, oven locked preheated LEDs, temp dial, Text saying Insta-broil Sounds like a relay on the control board. I would suggest replacing the control
149 questions posted
Usually answered in minutes!
329 Questions
63 Questions
26 Questions
21 Questions
