Question about Mag Innovision LT Computers & Internet
off by itself but lights stays on You may have a failed back light inverter board, inspect the fuse (Fxx) on the board to see if it is OK, or the inverter board may not be getting the 12vdc feeding it
Question about Mag Innovision LT Computers & Internet
...Inverter board (board model # 860-ALZ-M713-F / BF4250201G) tested poorly under load. The cause? The IC (U101) SEEMS to have overheated as the IC itself is scorched, and the board itself has darkened. ...
...inverter board, where can i buy or go to find one? Thanks Hi, Try this link http://www.pchub.com/uph/category/43/LCD-Inverter.html In some instances inverters for other brand/model will also work for ...
inverter board to eliminate the possibility of it shorting down the main and or power boards. Be careful as the inverter board supplies high voltage to the cold cathode tubes (backlights) and it bites
Question about Mag Innovision LT Computers & Internet
Board 860-ALZ-M713-F? This trouble maybe power supply or inverter boards is defective. first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those
Mag LT916a/900p monitor turns on and then goes black in less than a second. Sounds like the inverter is dying/died. Take a flashlight and shine it directly or at a large angle at the screen - is the ...
...it's a power supply problem, but I have no schematic to go by? This trouble maybe power supply or inverter boards is defective. first you can test the voltage of the multr,and then check which part ...
...inverter board, power supply interface etc.} Most of the time with these things, the problem spot is not any of the stuff you mentioned. It's a stupid little switching transistor soldered to the ...
Question about Mag Innovision LT Computers & Internet
a flashlight on it. If you see a dim image the back light needs to be replaced. Otherwise check the inverter as that may be causing the problem as well
...inverter board. If you have soldering tool and want to fix it by yourself, check the caps first. It may cause this problem. Some caps might show leaking or burn spot on the board because of too high ...
47 questions posted
Usually answered in minutes!
75 Questions
48 Questions
26 Questions