...attach, nothing changes. reset button, problem reappears. apply a DC voltage of 5v to the tape motor at the bottom of the camcorder. you'll find two little semi-hemispheres on top of motor. trial and ...
...power supply needs to be attached even though it is attached. The error code is C:32:11. We have read the error messages for C32, but there is no condensation anywhere and we have left if open for ...
...power reset (error 31). Unplug the camera, remove the battery and wait several minutes before re-attaching the battery and/or AC cable. Then power the camera back up. The 23 code says you need to use ...
Question about Sony Handycam Video Cameras
...attach the power source" message. But I can't close the tape door. Error code: C:32:11 Sony DCR HC-28 I have the same problem. I am only 11, but I know quite a bit about electronics. However, I have ...
...error message to reattach to power supply, tape door will not close. I have tried a new battery, plugging DC directly in, and the reset. Camera will allow me to take pics. Re-attach the power source ...
handycam dvd201e cant open door sony handycam dvd201e drive error, cant open door.....any solutions? With battery attached, Power switch at OFF position and press Eject button and wait for few seconds
attach the power source" now when I turn it on. I've replaced the battery with no luck. I've tried running it on just the power cord with no luck. I've tried the reset button with no luck. There is an
Question about Sony Handycam Video Cameras
...attach the power source followed by Reinsert Cassette I cant get the camera to record or the tape inside it to eject. Each time I turn the camera on I get am error which says "Reinsert the cassette". ...
...power to the unit and pushed the door closed and the trap door closed in place. I was also having a problem with the unit not wanting to play the tape. I was getting Error Code C:31:XX or C:32:XX. I ...
...error no. C:31.23 ,So before that it was showing reinsert the caset According to Sony, the 31 problem is one that requires a power reset of the camera. Turn off the camera, remove the battery, remove ...
181 questions posted
Usually answered in minutes!
310 Questions
243 Questions
242 Questions
159 Questions
150 Questions