NEC MultiSync 1920NX 19" LCD Monitor "tab" Questions

...and u need to make changes to the display in the control panel... Control Panel/Display/Setting tab/Advanced/Monitor or Display Tab...there u will get the choice to send the signal to either the ...

...Right-mouse click anywhere on your computer's "wallpaper". Click Properties. Click the Settings tab. Move the slider to a different setting. Click Apply. If you like the new setting, then, within ...

...old one and change the refresh rate to 60 or 70 hertz, go 2 display properties, then the settings tab, then advanced,then monitor. and set it as i said. turn off computer after you change settings. ...

...for this monitor.  If you still have the HZ error, click on advance look for the monitor tab, and make sure it is set to ...

...click your desktop and select properties->Settings->Advanced. There might be a color management tab. Also, there might be software to help you do this already installed. Look for a program group ...

what to do when your monater says no signal analog WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL. ...

a picture hey right click on your desktop.go to properties.in the propertes menu go to screen saver tab.click on the screen saver tab.in the screen saver tab menu you will see a tab called power.click

...is this enabled? right click on your desktop.go to properties.in properties go to the screen saver tab.click on the screen saver tab.under the screen saver tab you will a tab called power.click on ...

...VERSIONS OF WINDOWS MAY VARY right click on your desktop - go to properties click on the "settings" tab and then go to Advanced Click the "monitor" tab and you can change the refresh rate in there - ...

...go down to Properties, a window will open, across the top of the window go to the "Settings" tab, then at the botton right click on the 'Advanced' button. Now, here is were it can differe from ...