NEC MultiSync 1920NX 19" LCD Monitor "inverter fuse" Questions

...fuse on the inverter board. 1. The monitor must be opened: The black plastic back is pried off carefully. It is easy to damage or crack. This will expose the electronics. 2. Remove the metal covers: ...

...the room lights off and shine a flashlight on the screen. This leads me to suspect either a bad inverter or a bad CCFL/backlight. So the next thing I did was partially disassemble the beast. I ...

What is does mean when ur microtek inverter showing fuse blown a fuse has blown within your inverter

...you can also have bad backlight assemblies also, but check the fuse on the inverter bd first, verify that you do have 12v at the fuse.

...fuse on the inverter board check out OK? You can use other inveter board as long as the lamp connectors are the same and you just have to match the input signal pin. I have done many. ...

...inverter board is bad, you need to check and see if the surface mounted fuse/fuses are good on the inverter board, also check to see if it has 12v feeding it, post a pictures for further

...here due to bad caps: http://s807.photobucket.com/home/budm/allalbums Your unit has bad caps in the inverter and the power supply. The bad caps in the inverter causes a mosfet to short out and this ...

...inverter fuse was bad, and they've been fine after replacing it. (No reason found for the fuse to be blown, so I just put in another and it lit right up.) You might try contacting Acer to see if you ...

...F1 on the inverter board are blown. I am looking for the value of F1 also the availability of these parts F1 = Fuse 1 You should be able to locate a surface mount fuse at your local electronics

...fuse inside the monitor the inverter is fine you have problems in the dc to ac converter in the monitor it self . how long have you had this monitor. you can take it apart and check for your self it ...