RCA CC4252 Camcorder "vcr tape eject" Questions

...VCR ejects my tape? When I placed my VHS-C tape into the VHS PlayPak\adaptor and then placed it in my VCR, why is the VCR ejecting the tape? The VHS PlayPak adaptor uses 1 AA battery. When you place ...

...might have to attempt to rewind the tape from another vcr if possible. Please use 411, a pawn shop or your local white pages to attempt to find another vcr or camcorder to rewind that tape. Thank

VCR ejecting the tape? The cassette adapter uses 1 AA battery. When you place your VHSC tape into the adapter and close the cover, you will hear the motor running and the red piece on the adapter will

...tape. The VCR powers down after about 45 seconds automatically. Any ideas how to eject the tape manually? hi, the door mechanism is may be gripped because of a small kick... did you try to open the ...

...Tape when rewinding in vcr mode when the camera is in vcr mode it shows eject tape. When I reload the tape and I try to rewind or forward tape it goes really fast and eats it. look for a tiny pinhole ...

...tape. At VCR mode, press FF serveral times then REW same. Now try eject. If that did not work, you should take it to professional service facility near you for further diagnostic. Good luck, ...

vcr and camera functions were restored. However, the camera does not recognise that there is a tape in the camera. It shows o minutes of tape remaining and a tape icon slashed through it along woth an

...tape in the cassette stops running and at the same time the camcorder starts beeping with a cassette eject sign(same sign present on the eject button of the vcr) flashing on the lcd screen of the ...

...tape, which had been "eaten' apparently during rewind in VCR mode The cassette tray motor might is more than likely damaged, and will need to be replaced. Before you go this route, make sure there is ...

tape is stuck and will not eject. IMPORTANT: If your camcorder model has a RESET button, first try pressing this button. If there is no RESET button, or pressing the button does not resolve the issue,