Samsung DouCam VP-D5000i Mini DV Digital Camcorder "settings camera 4" Questions

Ad

...camera and onto the computer I have got the IEEE1394 cable 4 pin to 4 pin IEEE1394 on the laptop, enabled the IEEE1394 in network connections. But the laptop is not recognizing the camera as an added ...

Ad

Question about Samsung Video Cameras

1 Answer

...camera does stills ranging from 1600*1200 down to 640*480; settings range from Fine to Standard/automatic and manual. I would like to know the best resolution for 4x6" prints and/or manual vs ...

Ad

Question about Samsung Video Cameras

1 Answer

...have digital effects turned on, check your camera meno settings and turn everything off and start again. As for your sounds not being heard check your volume setting as it can go so low you wont

Question about Samsung Video Cameras

1 Answer

...4 seconds). I though that my fire-wire might be bad until I tested it with an SD Camera and it worked fine. Could this be a setting on the camera or computer that I have set wrong? Sometimes you need ...

Question about Samsung Video Cameras

1 Answer

camera, you gotta capture it with your pc and send it to your hdd after. Watch out that most of those hdd are set (partitionned) as they cant transfer file bigger than 4.xx gig... (You can usually set

Question about Canon Video Cameras

2 Answers

flashing DV IN signal when I connect to the computer and fcp doesnt recognize the camera. too weird. I know its not the cable. I plugged my little panasonic in and no problems.. same settings in fcp.?

camera you can set 'audio monitor'. Default is channel 1/2. You can choose to listen to 3/4 or 1/2 and 3/4 simultaneous. In the menu of the cam you can set between 12 bit audio recording or 16 bit. 16

...camera settings: all to the mid-range... then tweeking the color settings until you are DELIGHTED with your picture Take plenty of notes or scree shots to TRACK YOUR CHANGES... If there is anything ...

Question about Samsung Video Cameras

1 Answer

camera. Don't I need drivers? If you have windows xp or higher you don't need drivers just an intel based pc, atleast 1 or 2 gigs of memory and try it with the software that came with it...if you dont

Question about Canon Video Cameras

1 Answer

...recognize it. Using Vista. I had this prob too and it turned out that the settings on the camera had been changed. All I had to do was make sure the setting were AV->DV off in the VCR (play) ...

Not finding what you are looking for?
Samsung DouCam VP-D5000i Mini DV Digital Camcorder Logo

75 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Video Cameras Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

abdul rauf
abdul rauf

Level 2 Expert

483 Answers

Are you a Samsung Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...