No indication of power to the unit. I opened the unit and removed the cable connecting the main board to the LCD controller board. I disconnected it from the LCD controller board side. When power is ...
I made some corrections to your article. The inverter in the board under the metal shield and can be seen in picture seven while it is still attached to the driver board. It picture 8 and 9 you see ...
acer al1715 main board is a problem i bought three al1715 monitors and the problem was always the board that plugs into the motherboard,,,,,,,it could also be something on the power board that gives ...
Question about Acer AL Computers & Internet
...change inside the monitor? Normally there is a fuse that can be replaced inside on the power supply board. The are usually "slow blow" fuses and need to be replaced by an equivalent fuse. Many ...
Question about Acer AL Computers & Internet
...pictures please urgent reply me thanks My advice, dont make any attempt at repairing the circuit boards inside this unit. The power supply is more then capable of giving you a fatal electric
...Mark I saw your information on the Acer Al1912 19" LCD :: I have mine open and am looking over the boards for what can be wrong with it. It powers on briefly but then shuts down again. I've had ...
Question about Acer AL Computers & Internet
...AL1711 17" LCD Monitor showing white screen Hello, A white screen indicates the power supply board is not putting out the correct voltages to properly power the monitor, just the back light. ...
Question about Acer AL Computers & Internet
...meaning that the backlight is still ok, but it is something that has to do with the printed circuit boards. I opened my screen and the following boards are in it: 715L1142-3-AUE (=Power supply board) ...
Power board malfunction Hi, The technician said that my power board is gone. What can I do about this? Should I scrap the monitor and go for a new one or is this fixable? I would also like to know if ...
...and again. I have fixed many of the al1912 easy fix the problem is always corrosion on the circuit board that has the buttons disassemble the flat panel remove 3 screws that hold button board on ...
38 questions posted
Usually answered in minutes!
625 Questions
138 Questions
127 Questions
103 Questions
103 Questions