BenQ FP731 17" LCD Monitor "screen position" Questions

...I Imagine it is the senseye trying to compensate for the light falling on the screen, try changing the position slightly or cut back on the light that can hit the screen.seemed to fix it for

...Screen Can it be repaired. Power went off and it was left on. Power came back on while montor was still in the on position. Monitor was then tuned off. When computer was turned on monitor was also ...

display hey, I have a Benq FP767+ 17" LCD monitor and sometimes it will not display anything on the screen when i turn it on (The blue light stays on thou with a blank screen). When it doesn't display

during use playing games the screen suddenly went black; i operate two monitors simultaneously and the cable works fine on the other monitor and both graphics cards are working, any ideas on how to ...

Benq FP71G monitor screen displays momentarity on pc start up then goes blank. Toggle monitor power on off button to see screen for approx 2 seconds then goes blank again. Monitor cables connected and

screen, no dim display at all ??? Check the ribbon from the video card to the back of the panel. It has to be aligned perfectly and locked down in the right position at the video card side, and pushed

Screen Adjustment My screen has a black line down the right side of about 1/2 inch and across the top of about 1/4 inch. I can not find the instructions on using the buttons on the front of the ...

...are using the VGA connector and the position still needs to be adjusted, use the on-screen controls to shift the displayed image to the proper location (under Display Settings -> Horizontal

position. You need to place monitor on a firm surface at right angles to you, and firmly holding screen with both hands, slowly and gently apply pressure until it starts to move. Continue to full tilt

...screen (menu) then adjusting the third box down the coarse and fine and the verticle and horizontal positions my settings are course 1798 fine 48 h position 56 v positiion 50 hope this helps regards ...