Magic Chef CAV2000 Top Load Washer "unclog cloths drain" Questions

...The clothes will not drain properly. When I wash the LD code shows on the display. How do I unclog the return drain? ld means long dran you may have something under the tub that will slow down the ...

...top load washing machine. The tub will not drain. How do I unclog? unlikely that you have a declog valve accessible to user. most likely its clogged at the output electrovalve. get a service

...drain. Basically you have a clogged pump. I just had to unclog one today! Unfortunately they are a little hard to get at. Usually they have a small sock or coin stuck in them. The pump is located in ...

...unclog the drain hose? It sound like you have a blocked pump. Remove the pump from the machine and check where do you have this clogged, inside the pump or in one of the pipes connected to it. Good ...

...unclog the hose The drain hose is at the rear of the machine and goes to the waste pipe and to the drain motor in the machine. Gain access to the drain pump atthe bottom of the machine and remove the ...

...unclog the drain hose? It sound like you have a blocked pump. Remove the pump from the machine and check where do you have this clogged, inside the pump or in one of the pipes connected to it. Good ...

...unclog, but it's still doable. On the underside of most machines, you will see the hoses used to drain the water from the tub, connected to a pump, but sometimes also a water filter. I would first ...

or drain hose are clogged (unless pump burned). Turn off machine, unplug the machine, clean the filter, check for foreign objects inside filter and pump housing and finally check/unclog the drain hose

...extra spin but it will stop well before the 13 minutes are up. Is there any filter that needs to be unclogged - or what???? - it's troublesome/ Thanks you can remove the bottom access panel to get to ...

...drain is clogged. How do I unclog it? What else could it be? there is a filter under the washer door behind the panel...its white just unscrew it and clean out the filter and that should solve your ...