Sony CRX830E CD-RW/DVD-ROM (Combo) Burner "drive not working" Questions

...drive to a working state, try these options: Attempt to Eject the CD in System Setup. Software may be interfering with the normal operation of the drive. Reboot the computer and tap the F1 key while ...

Drive defect, repair or find replacement for HP laptop? I have a HP nc6120 mounted with a CRX835E-H5 But the drive is defect! Tray won't open, and BIOS won't detect the drive. So I guess the circuit ...

...drive is not able to read "only DVDs'. Other CDs are working fine. Also i'm having a problem with burning CDs as the software (nero, roxio) freezes in between and the drive locks up. Kindly suggest ...

DELL laptop does not read blank DVDs DELL laptop has sony cdrw/dvd CRX835E driver. It does not read or write on blank DVD disc. It does play a recorded DVD. No problem with CDs. the combo drive you ...

...on the CRX320A. Hello, First, have you used eject of operating system, under computer then choosing drive, right click then enter eject. Does this work, ejecting tray from drive? If this operation ...

...drive is not working ... i have sony dvd rw aw - g170a but this drive is not working properly when i try play video cd directly into it. It do nothing. I have notice that in device manager there is ...

...to open but will not. Other DVD works fine. What with the Sony DVD? try to find a tiny hole on the drive( near LED or eject button) and insert a niddle or some kind of hard pin which can go inside

drive for my LAPTOP. So, as you can imagine, i wanted nothing more than to open her up, check all cabling was working/plugged in correctly, but being a laptop made it a little harder, seeing as i have

working with DVD.it is unable to read DVD . It won't be a driver problem, DVD drives are generic, it will be either the drive has a problem, the dvd has a problem or your media player has a problem 1)

...working i need the drivers for my burner so it will run What operating system do you have? The drive is fully supported by XP onwards and should be auto detected. You may have to delete the current ...