Magic Chef 30 in. 8241RT Gas Cooktop "knobs off" Questions

SWITCH KNOB I CAN'T PUSH DOWN THE SWITCH KNOB TO TRUN? Pull off the knob and then see if you can push the shaft in. If you can, then the knob is hitting something, preventing you from being able to ...

What is the problem with one knob on cooktop? How can l fix it myself? My Westinghouse silhouette gas cooktop has one knob which wont turn on. It will turn partway on so the gas starts to leak but not

knobs off to clean them and now can not get one back on. The underlying post the knob fits on turns without clicking to the stop/off position and the white post(?) that goes on the inside of the range

...knobs off and examine the back side that slides onto the shaft. Switch them and try again. If the problem is on the same burner, the shaft may be turned past its normal stop position. You can try ...

the cooktop so the knobs will line up properly? Most of these knobs just pull off. If yours is like this, just pull off the knob, and reinstall by pushing back onto the shaft with it correctly aligned

Element on ceramic Frigidaire Gallery cooktop won't go off. Turned off knob and inner circle burner keeps coming on so had to cut power off to range top. Is the problem the knob or element? When I ...

knobs is in off position (I can ignite that burner with a match without switch control knob to on position). I felt that the control knob is hard to turn, so I removed the control knob and cleaned the

the knob on my gas cooktop does not work press down do a quarter turn and I have ignition, the knob is meant to turn more so the burner stays lit and to control flame but the knob will not turn let ...

...knobs off and use an air can (like for blowing dust out electronics) to blow down into the holes. This will dry out any water in there and should allow you to use it again. To be extra sure, blow out ...

...off the electric switch take out the control knobs. clean the grease and food partilcles if any using hot water and dish washing liquid .if the washer under the knob is stuck, put it properly and put ...