Nikon FE 35mm SLR Camera "stuck film" Questions

...film stuck? Is the rear door stuck? Does the film door open? As long as you do not damage the film canister, the film will be ok. If the door opens and the film is rewound, use something to pry out ...

film was stuck in the middle, load it again into the camera. With the lense cap on (preferably in a dark room or similar) 'shoot' as many 'empty' frames as you had on the counter plus two more. Finish

film stuck in on right hand side First, be sure you've pushed the film release button (usually located on the bottom of older film cameras) and then try rewinding. If the film is stuck on the take-up ...

...stuck. (Guessing you have an SLR.) The film advancing is normal; means it is cocked and ready to go but something is stuck. Take off the lens and see if anything is keeping the mirrors/shutters from ...

...stuck" When I went to load a new roll of film and I was in the process of forwarding it before closing the camera the film advance lever and shutter release button got "stuck"? The shutter release ...

...film advance lever stuck I wound the lever to far with no film in the camera and the numbers on top of the lever say its before zero, and the shutter release will not move, it is stuck down...I have ...

film is stuck in kodak advantix Film is stuck in kodak advantix tried a new battery and nothing happens - camera doee nothing APS cameras are very rarely seen these days because the film loading and ...

...film to check nothing was stuck on the inside & even without the film loaded the camera won't advance. Also the rewind button is now stuck in the depressed mode, but not rewinding! Any ideas? Scott, ...

Film Advance lever stuck My son inherited a Minolta X-370. It was working fine, but now the film advance lever is stuck. We have replaced the batteries. Help please! When you press on the shutter ...

...stuck Film advace lever stuck at about half way . . . Do you have a film in the camera? If so is it all exposed? Best thing to do is press the film rewind button and try the lever at the same time - ...