Malber WD1000 Front Load Washer/Dryer "turned" Questions

The drain pump only turns 1 turn counterclockwise and clicks to a stop. What happened? I replaced the belt. Thanks for the solution. The real problem seems to be the drain pump. It was running noisy. ...

Aquasmart bowl not turning freely, problem with stator assembly? As the bowl cannot turn freely, the machine won't spin. With out the rotor on, the shaft turns ok. Put the rotor back on and ...

error code E20 Turn the dial to off.Press and hold the start pause and nearest option button to it.Whilst holding them, turn the dial one notch clockwise.The machine will beep or flash, let go of the ...

...properly. At selected level, motor activates, hums and does not even slightly turn. Basket can be turned, and pulley below turns, but motor does not. Tranny can be turned by hand. The motor, if

my machine wont turn on before it didnt turn on it wouldnt wash when it tried made a noise i turned it of then tried to turn on it wouldnt turn on What is the model number of the unit?

i need to adjust the water level on my wash machine i found the screw to adjust the water level . which way do i turn the screw Turn 3 turns CW, if not OK turn 6 turns CCW.

I asked him to turn the beep off. He showed me how to do it, it said OFF and I hoped it was sorted. Turned the machine on and would you believe it's beeping still. I have remembered how to turn it off

won't spin,changed drive belt, motor pulley and other pulley's are free to move? but belt just stays there with out turning any thing? can you turn the center transmission pulley in BOTH ...

The washing machine did not drain. Turned to setting for it to drain but it just hummed. Thought it was pump so I removed pump from machine and it turns fine and don't see any broken pieces. ...

Maytag maxima washing machine Can't open. Water was turned off and machine turned to wash. I unplugged as it was humming. You plug back in and still hums. Is there any water in machine if so the the ...