Malber WD1000 Front Load Washer/Dryer "spigot" Questions

Ad

Question about Kenmore Washing Machines

1 Answer

Washer has one hose how do i hookup to 2 spigots My mother in law just moved into a new house. She has an older kenmore washer/dryer (at least 20 yrs old). It only has one hose, how to I hook it up to

Ad

Question about Bosch Washing Machines

2 Answers

...hose isn't blocked (particularly if it is connected directly to the u bend of the sink via a spigot). Take off the spigot from the u bend and then disconnect  the spigot from the grey ...

Ad

...coming into the washer. First, I would make sure that you have hot water available at the washer spigots. SLOWLY unscrew the hot water hose at the hot water spigot and see if you have hot water ...

...more details, but normally, these machines have two hoses, each connecting to a seperate water spigot, one for hot, one for cold. You don't say how you hooked these hoses up, but it's ...

Question about Bosch Washing Machines

1 Answer

...that has absorbed the dye, also check the outlet if i'st connected directly under the sink via a spigot, remove hose from spigot and unscrew spigot from joiner on sink plumbling to be sure it is ...

Question about Washing Machines

1 Answer

bowl filling after use Try turning off the water spigot on the wall, one at a time. If the water stops filling then one of the inlet valves in the washer is sticking open. If you turn off the water ...

Question about Fisher and Paykel Washing Machines

1 Answer

...GW712 hot water fills fine - cold water just trickles. Was working fine until yesterday Turn that spigot off, then unscrew the hose from the machine and inspect the screen that is there (on most ...

...when open valves fully no hot water Dear Clement, Here is how to check this. Turn off the hot water spigot that feeds the hot water to your machine. Unfasten the hose at the wall, and have some rags ...

trying to hook up washer to water lines. need to replace the spigots on both lines. shut offs in basement have corrosion on them and i cannot get them to turn. any suggestions Heat them with a Propane

Question about GE Washing Machines

1 Answer

...to make sure this is probably the problem and not possibly something else. thanks Check the drain spigot that the drain hose attaches to under the sink/tub. There may be a blockage in the

Not finding what you are looking for?
Malber WD1000 Front Load Washer/Dryer Logo

246 questions posted

Ask a Question

Usually answered in minutes!

Top Malber Washing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

john h

Level 3 Expert

29494 Answers

Are you a Malber Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...