Malber WD1000 Front Load Washer/Dryer "heating element" Questions

Ad

Question about Washing Machines

1 Answer

...heating element cabinet. For most dryers this is located in the back, however it can be in the front. Find the compartment on the dryer. Remove the screws or clips to get into the compartment to ...

Ad

Question about Maytag Washing Machines

1 Answer

heating element?? I would check heating element also on the heating element box is a thermostat probably need to check that also take the wires off the heating element and use an ohm meter to check it

Ad

...heating element in the dryer isn't heating up. The the heating element in the dryer of my Sears stacked washer/dryer is not heating. Is there a reset button somewhere, or does the element need ...

Question about Maytag Washing Machines

1 Answer

...heating element or thermal fuse. The heating element and fuse can be checked with an ohm meter. The reading should be 0-2 ohms on both devices. If heating element reads infinity (nothing) replace ...

Question about Whirlpool Washing Machines

2 Answers

...heating element may be defective. (3) Have it replace by qualified personel There are 2 checks for the heating elements: #1 Check the voltage to element ( Black to ground, and red to either terminal ...

Question about Washing Machines

1 Answer

heating element circuit has failed, the "F/05" error code will be displayed. Potential Causes ? Check the Water Temperature Sensor, Heating Element and Element Relay ? Check connections to the Sensor,

...heating element? I guess I should count myself lucky that my Malber WD 1000 is 7 years old. Up until now, I've never had a problem. Now it won't dry. I've removed the cover as "pete5runner" ...

Question about Washing Machines

1 Answer

...heating element circuit has failed, the "F/05" error code will be displayed. Check the Water Temperature Sensor, Heating Element and Element Relay Check connections to the Sensor, Heating Element and ...

...go onto the heating element on a hotpiont aqualtis washer what side does the live wire go onto the heating element? Please check this link for tips to check on the element: click on: Heating ...

Question about Malber Washing Machines

1 Answer

...Heating Element and Element Relay. If during the water heating step in wash cycle,the water temperature sensor(NTC) value is out of range,or the heating element circuit has failed,the F05 error code ...

Not finding what you are looking for?
Malber WD1000 Front Load Washer/Dryer Logo

246 questions posted

Ask a Question

Usually answered in minutes!

Top Malber Washing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

john h

Level 3 Expert

29494 Answers

Are you a Malber Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...