Malber WD1000 Front Load Washer/Dryer "corrugated hose" Questions

Ad

...corrugated hose, into the filter, out of the filter through another soft corrugated hose into the pump and out of it through the hose that is put to the drain. Have you checked all of these pipes? ...

Ad

corrugated hose they are prone to standing water inside and you may want to replace it with a non- corrugated hose. I suggest you run the machine when hose is re- attached with only bleach a couple of

Ad

Question about Frigidaire Washing Machines

1 Answer

...drain hose is 134049200. There is an 8 ft corrugated drain hose with a part number SSD8 and has a universal end which you can cut to fit, and is approximately 96 inches long. hope this helps. ...

We need to replace the drain hose,,, it leaks at one of the corrugations in the hose . We have a model Frigidaire Model LWS3312DS0 I have your drain right over HERE It's cheaper HERE Sears is cheapest

Question about Kenmore Washing Machines

2 Answers

...in it, rinsed out the black corrugated hose, put the trap back inside, assembled it all back together (much harder than taking it apart!) and VOILA! It drained and spun out perfectly. Hope this

Question about Whirlpool Washing Machines

1 Answer

...corrugated drain hose already attached. the drain hose needs to be attached appr. 32 inches above the floor and needs to have an airgap between the drain pie and the drain hose in order not to sifon ...

Question about Bosch Washing Machines

2 Answers

...and then disconnect  the spigot from the grey corrugated drain hose, check both parts are clear.Best of luck what is the model number as there are different fault codes for each types of ...

Question about Malber Washing Machines

2 Answers

...corrugated drain hose stay brackets (both) don't stay clipped to the machine.... since the plastic stays are broken, is there any chance of obtaining those two parts? door handle broke at plastic ...

Question about Hotpoint Washing Machines

1 Answer

...corrugated hose that connects from the bottom of the drum to the drain pump. On the drum end there will be a big metal clamp that you can unscrew. Once lose the hose should easily come off the drum. ...

Question about Kenmore Washing Machines

1 Answer

...hose going from the bottom of the tub to the pump. Come of those hoses were a harder (read cheaper) corrugated plastic instead of rubber. It's an easy fix and I replace those plastic hoses with a ...

Not finding what you are looking for?
Malber WD1000 Front Load Washer/Dryer Logo

246 questions posted

Ask a Question

Usually answered in minutes!

Top Malber Washing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

john h

Level 3 Expert

29494 Answers

Are you a Malber Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...