...burnt rubber. This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine. First, see the Sears ...
...burnt rubber smell is a worn motor coupler. Sears parts site http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?pop=true&modelNumber=110.24922200&pop=flush Go to the sub section ...
...burnt rubber, sounds like it wants to start This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) ...
...burnt smell. timer moves but no agitating, spinning or draining. This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes ...
...burnt) and the clothes come out wetter than normal (like I would have to thoroughly wring out the clothes to put them in the dryer). What could the problem be? And would it be worth fixing or buy a ...
...burnt.. after it goes thru the whole cycle, the clothes still wet and very soggy...please help... This advice is for certain Maytag TOP LOADING washers equipped with a vertical transmission and drive ...
plate. Carefully line up the plastic prongs on the motor based plastic piece to the three un-used holes in the rubber piece. If they don't line up right, the coupler could be damaged. Mount the motor,
plate and offered a new machine prorated of course or a refurbed unit free of charge. I told them to pound sand! The only way this was going to get resolved was by giving me a NEW unit free of charge.
Question about Maytag Washing Machines
...burnt out or is sticking somtimes giving the top of the controll box a firm smack will get it freed up If the washing machine fills and overflows - it could be possible that the tube leading from the ...
246 questions posted
Usually answered in minutes!
49 Questions
8 Questions
9 Questions
4 Questions