HP iPAQ HX4700 Pocket PC "device locked" Questions

...an iPAQ hx2795b. The today panel will lock up, and the only way to clear it is to soft reset the device. for soft reset u have to entre ur stylus in the small hole which is located on th eleft ...

...locked and I cant figure out how to use it I think you will have to perform a hard reset, i.e. turn your device back to its factory defaults, in order to get rid of the locking condition left over by ...

...locked out of my iPAQ press and hold the Calendar and WiFi buttons while holding those buttons down, press and hold the reset button for ~2 seconds When the HP iPAQ screen begins to fade, release the ...

ipaq6515 my ipaq has been locked by network iemi number and is on black list any ideas was your device reported stolen?

...to be replace or resitted. Next time, backup your data to a memory card. Make sure the two battery door lock buttons are in the 'lock' position. The device will not turn on unless these are

...only fingerpring password for hx2755 without rest of security overhead Is there a way to secure my device with a fingerprint password without the rest of the HP security overhead? For instance I

...My hp rx1950 wont turn on after a few hours. I then have to pull out the battery, restart the whole device. After that, the PDA works 100% fine. I can even turn on and off the device. The battery is ...

...(reset hole) with your stylus for about 2-3 seconds. The Pocket PC should reset and power back on. If the device does not power back on, make sure that the battery lock switch is to the left

device is sort of locked up for too many alarms/notifications being prompted while the device is shut off. This may cause a shortage of memory, for which soft resetting is the only way out. Anyway, as

...device does not power back on, make sure that the battery lock switch is to the left (locked). On mine the "far left" and "far right" buttons are the green "phone pick up" and red "phone hang up" ...