...recently it is not working we dont know why it is not working If you got the store bought APC 350 UPS, you most likely overloaded them, and killed them beyound repair. People should never buy a ...
...back plug in, alarm sounds, line and overload lights flash. push on/test button, fault light and 50% lights turn on but don't flash, while alarm sounds and line and overload lights flash. no power ...
...back up with 2 pcs simultaneously without any power fluctuations. A desktop or tower PC will draw 50 va each. A flat monitor will draw less than 50 va each. Your UPS IS RATED AT 1000va. As you add ...
50Hz to 60Hz conversion Is it possible to set up the unit so that the input is 240V 50Hz and the output is 240V 60Hz? I need to power 60Hz US made equipment in a European country and can use a ...
...batteries, it should come back alive. If it does not come back on, your inverter is dead. It is a 50/50 chance that it will come back alive. May I suggest you take it to a battery store, and allow ...
Question about Fiskars Brands Computers & Internet
...Watts) Make : M/s. Fiskars Power Systems, Maxico Battery : 48 V DC (External) Input : 220/230 V AC 50 Hz Output : 220/230 V DC 50 Hz Make : M/s. Fiskars Power Systems, Maxico Part No. 05103604-0401 ...
My UPS shows 'site fault" message with bip alarm. What does it mean exactly?Thanks to reply You're getting a power surge through ur outlet. Where it is plug in battery show 12v but no backup
...UPS. Lower is better as PC will have more time on battery to fully shut down. If load is more than 50%, perhaps connect the monitor to the wall socket
...but on output has no wires ( is just receptacles). See below details : Input connection : 230V, 50-60 HZ (Hard wire: 3 wires) è connect to power source Output connection : (8) IEC 320 C13
1 questions posted
Usually answered in minutes!
11 Questions
11 Questions
13 Questions
3 Questions