...burner will not stay lit. I have the same problem especially with the center burner, but now am having increasing difficulty with two other burners. Those will eventually stay lit if I depress the ...
...burner turned off. burners cool down but light stays on. rear burners seem to stay on the longest amount of time if its going out, its probably ok its not a light indicating the burner is on, rather ...
why burner on light on stove wont come off range is off but burner on light stays on After stove is turned off, the light stays on if burner still warm. If the burner never came on, then it needs to ...
...stay lit The burner ignites every time, but does not stay on, no matter how long held. This after about 15 months of trouble-free use. I cleaned and dried everything very carefully... The ...
Question about Cooktops
Light "Burner On" stays on all the time on my electric stove GE model JBS27WH2WW I have an electric stove GE Model JBS27WH2WW. I have to replace two of the burners which I found on internet. Also, the
Question about GE Cooktops
Hot surface light stays on on GE Profile Cooktop model JP989 and On does not light for left burners. This is only happening on left burners. Left front burner goes to high with any setting on the ...
Question about DCS Cooktops
the burner in question is the center back the indicator light stays on even in off mode the model is RDT 486 gl 6 sealed burners and grill u may have a bad switch.. if the light stays on while all ...
Question about Cooktops
Blog that deals with this problem. Appliance Repair Forums Typically a bad infinite switch will cause hot surface light to stay on. I would start by testing the switch for the burner that doesn’t work
one of the burners stays on high. can that be fixed? Hello, Thank you for your post. Sounds like your having a problem with one of the burners on your cooktop. Yes, you can have this fixed. The burner
burner light stays on The left rear burner works fine but the light that indicates that it is on stays on constantly, even when the burner is off. Hi, This is caused by a faulty sensor that is located
7 questions posted
Usually answered in minutes!
29 Questions
19 Questions
31 Questions
12 Questions
2 Questions
