HP Compaq Presario V2000 Notebook "pin retention contact" Questions

...contacts can break. You would be best refering to a repairer. You need a cable retention device like the jerkstopper mentioned in this video. . . Keeps the cable from jerking on the fragile power

...contact could be made at all. I think this may be a problem with the connection inside the laptop itself. I tried taking the screws out of the bottom of the computer to disassemble it. However, I ...

...more Have a good new year John Problems sounds like a damaged power pin from pulling or jerking on the AC cable. I use a Cable Retention Device like the one in this video to keep from hurting the

...retention device liek the one in this video to keep my plug intact. Until you test the actual power pin you have no way of knowing that it (the pin) or the connection to the mother board isn't bad. ...

...pin failure). The pins/sockets are poorly designed and poorly constructed. The day-in and day-out jerking and pulling on the cable causes the failure. This video talks about using a cable retention ...

...pin is all flimsy and the light to say the pc is charging keeps flashing on and off If the laptop just shut off and wont turn back on at all. Try disassembling the laptop and reset the battery on the ...

...pin it causes damage...eventually it doesn't work at all. When you get it fixed you need to invest in a CRD (Cable Retention Device) like shown here. . . There are several things that could do what ...

...connectors. Those flat connectors slide into the motherboard connector, and line up with contact pins in the motherboard's connector. When reinstalling the cable, and it's flat terminal strips, ...

...pin fixed. The cable retention device is designed to keep you from damaging the pin by pulling on the power cord. In this case, it sounds like it's too late for that. mmm i wouldn recommend to touch ...