Miele 35 in. KM326G Gas Cooktop "burner off" Questions

burner has the on/off extra low setting which is not working (does not cut on/off when in extra low position). I have the same problem, but my cooktop is a 6 burner and it is not the extra low setting

...off, even with the burner knob set to OFF. Repeatedly switching the circuit breaker off and on several times a day over two or three days finally reset the burner and it's working again. (We'd switch ...

...burner off. And it takes serveral tries for the spark to stop after ignition. More annoying when you lit a second or third burner, the sparking doesn't stop until ALL the burners are shut off. Then ...

stove wont come off range is off but burner on light stays on After stove is turned off, the light stays on if burner still warm. If the burner never came on, then it needs to be replaced with new one

...burner to a lower setting, it will turn off. Whats the problem? Thanks. the burners are halagen they are supposed to work that way but dont use them without a pan on them to reflect the heat back to ...

...burner will not turn off! All the burners except one work fine. The main burner will not turn off. It is stuck on high. To get it to turn off I have to turn the breaker off. Does any one know what is ...

...off, but the fact that just the one burner tries to turn on makes me nervous. thanks Hello- On modern gas cooktops and ranges when you turn on one burner ALL the burners will click, spark, until that ...

...set on Burner stains Hot cookie sheet accidently set on hot burner. Now black burned area on burner. How can we get it off? abrasive cooker cleaner. and pad. should clean it off. give it a good

...on the front left burner. I believe the iron/steel in the pan is causing a magnetic field thats starting the rear burner to go off.. just don't know.. will report back after the repair person

...burner will pull off. I believe on this one you have to take off both burners in order to remove that section of the cooktop. Be very careful no to force the nut because if it starts to turn but is ...