Miele 36 in. KM342 Gas Cooktop "thermador igniters spark" Questions

igniters keep sparking How to replace spark module Todd, Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check

Thermadore gas stove top - left 2 burners won't light I have a Thermadore gas cook top model SGSX365ZW. I has 5, star burners. The left two burners (front and back) will not light. The igniter sparks,

...Thermador cooktop has the ignite sound and spark but it does not light. the other burners are working fine. try to clean a little bit the head of the sparkler and push the button for gas a little bit ...

...Thermador gas cooktop with 4 gas burners and an electric griddle. When you turn off all the burners the igniters all start firing and won't stop unless the large burner is lit. If you lite any of the ...

...spark I have a Thermador Gas Range PG364GDBS - Oven, 4 burners, and center griddle. All are gas. The four burners and gas oven work fine. The griddle just stopped working, no spark. Turning on the ...

...thermador psc364gdzs the spark does not work for the gridle The spark module is in the ignition circuit for the gas burners. When a burner control knob is turned to the Lite position, it provides ...

Thermadore cooktop SGCS365RS No gas to one burner. Now no spark to any burners. Was told that Thermadore has had an on-going problem with this and they have a replacement kit to take care of the ...

...spark module. Manual 5 burner Thermador Stove Top. Middle Burner that has a on , off delay feature. Will not light off I have replaces tubes, and solenoid and all is clear up to were it connects to ...

Both extra low burners don't light On both burners, the starter spark that each burner on the cooktop has to spark the flame, does not spark Hi, Here is a tip that I wrote to help people troubleshoot ...

I have a Thermador PRD48JDSGU 6 burner stove, front right burner will not ignite. When I push it in & turn it sparks but no gas & an Error Comm is on the display. try cleaning the burner completely ...