Question about HP PhotoSmart Office Equipment & Supplies
ink. Which leads to sloppy prints, sensor errors, leaky or dead jets. Personally I recommend everyone buy Laser printers. With prices where they are these days, there is no reason for anyone to buy an
...showing error risks further confusion and problems. I think that you problem is probably very simple. Do you know hao to reset your ink levels. Read your manual that came with disk or go to the ...
Red exclaimation mark on C5280 Hi, I have a HP photosmart now about 6 months. Recently it hasn't been starting up - it just shows the red exclamation mark. I cant even get the ink cartridges out. Any ...
ink problem Ive inserted both tri colour and black cartridges and done the alignment test and it was successful the only problem is it still shows the ink icons on the little screen on the printer ...
Question about HP PhotoSmart Office Equipment & Supplies
...showing two small icons in the bottom left hand corner they have question marks on them. the printer has suddenly stopped printing anything at all, and i wondered if this was the cause Check the ink ...
...ink cartridges out. Any ideas? After loading a new HP black printer cartridge 21 the machine refused to print from Word or notepad. On copying it only copied 60% of the inserted document. I followed ...
Question about HP PhotoSmart Office Equipment & Supplies
...showing full, and thry trsvel back and forth, but no printing Your printhead is either clogged or not working. There should be a self cleaning program built in to the printer. Run this 4 or 5 times. ...
Ink cartridge alignment problem Hi, I am having problem with my new ink cartridges. I installed them and then went through the alignment process and printed test page. The message that comes up in the
...ink-series printers with KEYPAD (i.e. keypad numbers 1-9) Similar Video Procedure: http://inkjet411.com/?page_id=2391 1. Press * and # keys simultaneously. 2. "Enter Special Key Combo" will be ...
Ink failure code OXC19A0036 Screen shows shut off printer, then back on. When I do this it still won't print and that failure message shows up again By the way ..if it still makes the same issues.
607 questions posted
Usually answered in minutes!
1,869 Questions
1,438 Questions
900 Questions
484 Questions
508 Questions