...low, so I bought new ink. BEFORE installing new ink, I printed and the photo had a very green cast. I replaced the ink and it still prints very green. ??? it sounds like another color could be low or ...
Question about HP PhotoSmart Office Equipment & Supplies
the ink cartridges are low or empty. I have the exact same problem, same blinking lights and ink blobs and it has nothing to do with low ink! Havent figured it out yet though and its driving me crazy!
...low ink. refer to troubleshoot Wither the ink cartridge is not connected properly or the sensor on the ink cartridge is damaged while taking the protector cover out. Also during winter the ink gets ...
Question about HP PhotoSmart Office Equipment & Supplies
...ink but black is low printer has not called to change it. printer did not tell about empty cartrigde it just showed that the black was low but not empty -- decided to replace the cartridge early and ...
Question about HP PhotoSmart Office Equipment & Supplies
low ink" error message This is the third cartridge that within a week or two gets a "low ink" error message and printing is compromised ... first page is OK, then most of most pages has what look like
Question about HP PhotoSmart Office Equipment & Supplies
...low ink levels. I found that when my printer wouldn't print, someone suggested resetting it. I don't remember just how I did this, but you might look into this. I thought I would need to buy a new ...
...low ink cartridge, even though some pages printed out fine and others half-good. Eventually, all pages turned faint, and upon re-installing the driver, I got a low-ink warning (the first one ever). ...
Question about HP PhotoSmart Office Equipment & Supplies
...ink low', 'non-genuine', 'counterfeit' messages and similar while you are using these types of aftermarket supplies. The first video below provides an overview of this 'low ink' phenomena. ...
Question about HP PhotoSmart Office Equipment & Supplies
...low on ink. I replaced it and the alignment page that used to print each time I turned the C3100 on no longer prints out. Hooray!!! :) ...
Question about HP PhotoSmart Office Equipment & Supplies
...ink is really low or nuzzle is blocked. To be very sure of this, place nuzzle in a plate/saucer with a bit water so that the nuzzle is soaked. Leave for about 10 minutes. Then apply the tissue again. ...
607 questions posted
Usually answered in minutes!
1,869 Questions
1,438 Questions
900 Questions
484 Questions
508 Questions