...Check for and remove any obstructions along the carriage path. Gently push the carriage all the way to the right side of the product. Close the cover and reconnect the power cord. The product will ...
Question about HP DeskJet Office Equipment & Supplies
...check the rollers and wheels for torn pieces of paper that might remain inside the accessory. If all the pieces of paper are not removed from the accessory, more paper jams might occur. 3. Press the ...
Question about HP DeskJet Office Equipment & Supplies
...check the output roller after fuser unit(if there is), check them are spin or not, this roller kit use for pull the paper goes out the tray. if not spin means the roller drive belt or gear loosen. 3) ...
Question about HP DeskJet Office Equipment & Supplies
...Check the input area for obstructions such as media in the path. Also check to see if the registration assembly damaged or unseated. 3. Replace any defective sensors or flags. 4. Verify the media ...
...Check inside the printer to see if the cartridge carrier latches that hold the ink cartridges down have popped open. Close the carrier latches STEP: Remove any Torn or Stuck Pieces of Paper from the ...
...Check inside the printer to see if the cartridge carrier latches that hold the ink cartridges down have popped open. Close the carrier latches STEP: Remove any Torn or Stuck Pieces of Paper from the ...
...Check the input area for obstructions such as media in the path. Also check to see if the registration assembly damaged or unseated. 3. Replace any defective sensors or flags. 4. Verify the media ...
...check fuser and pressure roller(near fuser) any pieces of paper there 4) after fuser to output tray all above step checking for avoid any pieces paper obstruct any sensor through all paper road, so ...
...check the paper feed areas of the printer to ensure that there are not any obstructions in the printer that would prevent the paper from feeding correctly. Once this has been verified, we can perform ...
...output tray. look inside the product..check for torn papers..gently pull out the paper fromthe roller...return the paper output tray and the carriage access door. plugthe power corn and turn on.. 4. ...
205 questions posted
Usually answered in minutes!
2,162 Questions
707 Questions
530 Questions
316 Questions
318 Questions