Question about HP DeskJet Office Equipment & Supplies
...jam is cleared, OR if the print carriage is stuck or making a grinding noise, then follow these steps. Solution Lift the top cover of the printer. Turn the printer off and then on again. Unplug the ...
...jam is cleared. OR The carriage is stuck or making a grinding noise. Solution 1. Lift the top cover to the printer. 2. Turn the printer off and then on again. 3. Unplug the power cable from the back ...
jam top cover...we have opened the machine and removed the paper that was actually jammed but now the machine is clear of any paper and the paper jam message wont clear. Ive restarted and reset and it
...jam message: You have to take the back cover off, there is a reset switch in the top left hand lock hole. Use an object to push in the pin hole. After that put back the cover on. This should help you ...
...top recognizes the printer, I have paper in the printer, but I have a flashing yellow light. It will not do a test print and there is no paper jam. What could be the problem? There probably is, in ...
...jam - even if I hold it down I still get the error how do I fix it so it prints I had the same problem and fixed it by sticking the end of a pen (the writing part) in the hole on the right side when ...
Question about HP DeskJet Office Equipment & Supplies
...top cover to replace the ink the catridge will move to the center but now even you open the cover the catridge doesn't move.... another is it appears in the printer status that it has "paper jam" but ...
Question about HP DeskJet Office Equipment & Supplies
...cover gently try to pull carriage out if its jammed, open top & side covers, release service station capping through manually rotate gears, once its released, push carriage left side, ...
...jam status.... Take the back cover off, there is a reset switch in the top left hand lock hole. Push a pen (or similar) into this hole, the switch will give slightly and be the same depth as the ...
Question about HP DeskJet Office Equipment & Supplies
jam in the printer , printer is not responding for any movement . Cartridge is not moving after opening the top cover and not printing any document. 1.PLESE CHECK PRINTER BACK COVER HERE IS ONE SENSOR
633 questions posted
Usually answered in minutes!
2,162 Questions
707 Questions
316 Questions
318 Questions
281 Questions