HP OfficeJet D135 All-In-One InkJet Printer "adf cover open ok" Questions

...ADF. Open the cover, lift the rollers and u can see the scanning glass. Take a lint free cloth and clean it. it will be ok. The above solution is 100% correct. If it doesn't resolve it, clean it some ...

...ADF cover, disconnect the ground strap on the right side of the cover, and slide the cover slightly to the right until it is unhinged. The cover housing the scanner glass can be lifted off after ...

ADF, then open the Document Feeder Cover. 4. Raise the Paper Release Lever, then remove the jammed page from under the roller to the Document Feeder Cver side. 5. Pull out the jammed document from the

ADF cover NOTE: Remove all originals from the ADF tray before you open the ADF cover. 1. Open the ADF cover, and then close it again. 2. Press the OK button. * If still a problem, go to the next step.

...ADF, then open the Feeder Cover. Remove the jammed page from under the roller to the Feeder Cover side. Pull out the jammed document from the ADF. If the document cannot be easily pulled out, proceed ...

...for detecting load paper in the ADF section. Check if there is something that keeping it stuck in that position. You will need to open the cover of the ADF section to do this. Hope it

...ADF folder and wrapped around the rollers when the cover is opened Most probably the rollers are sticky. Try cleaning the rollers with fibre cloth soaked & squeezed dry. Use a blower to clear any ...

...ADF. Close the feeder cover and press OK to eject document. I don't want to eject the document -- I want to print it! Please advise. Canon Pixma MX330, ADF error, Code : 2,103,0 Here's what I found. ...

cover of the ADF and look for a rectangular hole with a lever stuck down. That lever should only go down when a paper is placed in the feeder, and sometimes they get stuck in the down position. A bent

...ADF, Close feeder cover and press OK. Rebooting does nothing...the printer remains in this repeating loop and there is not a thing stuck or inside it. Hello, The sensor may be dirty even if it looks ...