Print head carriage drive belt failure.[hp deskjet 710c] there is a rubber belt that moves the head from left to right if its broken it needs to be replaced or if its just got loose open the sides of ...
Hi, my printer was dropped and the belt that makes the cartridges came off. Can this be fixed? Yes, as long as the belt is not broken nor the pulleys that hold the belt.
the print cartridge will not move There is a "belt" (with pulleys at each end, and the carrridge in the middle) that pulls the carriage from edge-to-edge. If that belt is broken, or the clamp that ...
Question about HP DeskJet Office Equipment & Supplies
My HP Deskjet ink drive belt has broken, where do I find a replacemnt? It's quite difficult to get a belt replacement. When I need one, I go to the flea market or Good will stores to buy a broken ...
HP 880c Drive belt needed I have a HP 880C deskjet printer. The carriage drive belt has broken. I am a do it your selfer and would like to replace the belt myself. I believe the belt number is ...
Question about HP DeskJet Office Equipment & Supplies
Print head carriage drive belt failure. Toothed belt which carries print head requires replacing, it has disintergrated. I can not find the part on the net, will the belt from another model compatible
Question about HP DeskJet Office Equipment & Supplies
HP Deskjet 722C printer belt has frayed and come apart The belt which moves the carriage with the printer cartridges has frayed and come apart. Can it be replaced? Dear DIOGENES2001 , Yes , please ...
Question about HP DeskJet Office Equipment & Supplies
My HP Officejet 6500 model E709a ink cradle does not move The belt that moves the carriage back and forth may be broken. Have a certified technician verify this and you may be able to have the belt ...
how do I clean the rubber belt the printer makes a lot of noise every time I print and towards the end of the page only half the words are printed. it seems the rubber belt is causing the problem. Its
Question about HP DeskJet Office Equipment & Supplies
belt for cradle movement slipped,dont know how to re conect the belt...plz help me with this :( you will have to dismantle the entire machine to remove the axle that holds the cradle in place , and ...
366 questions posted
Usually answered in minutes!
2,162 Questions
707 Questions
530 Questions
316 Questions
281 Questions