...replace the fuser unit and the printer make a big noise when I printing. Whats wrong? toner cartridge, fuser unit or another thing? If the printer was not making the noise before you replaced the ...
Replace the fuser. See Fuser on page 191. This is from the service manual the fuser unit probabaly need replacement Good Luck 58.04 ERROR To continue turn off then on. The low-voltage power supply has
...replace the fuser. 3. Faulty DC controller PCB. Replace the DC controller PCB. 50.2 error - Fuser Failure (Abnormal Warmup). Perform the following steps: 1. The connector between the fuser and the ...
Question about HP LaserJet Office Equipment & Supplies
...replace the fuser unit. in short a 'fuser' or fuser unit also fixing unit on this HP color laser jet printer is just below the dark cover were the paper comes out remove the two side covers ...
Question about HP LaserJet Office Equipment & Supplies
...unit is supposed to heat-up, to "melt" the dry "toner" ink into the paper, but your printer has detected that the fuser is not working. Replace the _broken_ fuser unit, or replace the entire
Question about HP LaserJet Office Equipment & Supplies
...replace the fuser film, not the whole fuser. Fuser Unit replacement with labor is going to cost you somewhere in the area of $300.00. If you can find an honest person they can just replace the fuser ...
Question about HP LaserJet Office Equipment & Supplies
...printer cover take out the fuser unit and remove the paper pieces. 2.if there is no paper pieces you must replace fuser unit Teflon or entire fuser unit. ordinary teflon costs about Rs300.(6
...fuser and replace it if your are mechanically inclined. If not you can have a local printer repair shop replace it for you. At least they won't rip you off on the price of the fuser unit. ...
...replace fuser kit i have replaced fuser kit but hp laserjet kewep say replace fuser kit These is a part on the fuser called a fusable link that blows the first power up cycle and resets the replace ...
Question about HP LaserJet Office Equipment & Supplies
...fuser and replace it if your are mechanically inclined. If not you can have a local printer repair shop replace it for you. At least they won't rip you off on the price of the fuser unit. Note that ...
1,256 questions posted
Usually answered in minutes!
1,429 Questions
724 Questions
663 Questions
593 Questions
492 Questions