Question about HP LaserJet Office Equipment & Supplies
...replace transfer kit - old printer is this necessary? Can it be over ridden? You can not over ride it. You can keep on printer till the printout gets bad. Then you will have to replace the transfer ...
REPLACE TRANSFER KIT. The image transfer kit contains a replacement transfer unit for this printer. WARNING! Remove any jewelry or any other metal items from your body to avoid electric shock. 1. Lift
...Transfer kit replaced and when I replaced it, it still states that the transfer kit needs to be replaced. When the fuser was replaced on this unit, it automatically reset the count, but did not do so ...
...replace transfer kit message. I have swapped out known good transfer kits and the printer prints fine but I still get the replace transfer kit message. What can I try next? The message only clears ...
...REPLACE TRANSFER KIT message displays on the control panel. 1. Turn the printer off. 2. Open the top and front cover. 3. Lower the ETB by pulling the green handle at the top of the unit downward. 4. ...
Question about HP LaserJet Office Equipment & Supplies
...replace transfer kit notice This means you'll have to replace the transfer kit because it is "end of live". This also causes the printing problems. The transfer unit is the big black unit you'll find ...
...replace toner message either. What do we do? The transfer kit is unrelated to the toner. On most printers it gives you the message that it needs replaced after X number of prints. Depending on page ...
Question about HP LaserJet Office Equipment & Supplies
...the inset and try printing a test page,if problem persist,replace the DC board and if problem doesn't pls replace the transfer kit/electrostatic transfer kit.let me know as soon as you the
Question about HP LaserJet Office Equipment & Supplies
...transfer kit and laser toner cartridge to my HP Color LaserJet 8550n Printer and when I print, the paper go out completely in black. What could happen? Put the original cartridges and transfer kit ...
Question about HP LaserJet Office Equipment & Supplies
...status page. A PM kit will have a fuser, transfer roller and feed rollers. If the PM level is low ,order and replace kit. If not you may want to get a new fuser YOU HAVE TO REPLACE THE FUSER
143 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions