...can fix erorr front door open i hav amasig cols front door Locate the door sensor and clean it, use nail polish remover and a cotton bud. Chances are it is jammed because of dust/dirt/hair or even ...
...front door but cannot remove pinter cartridges; they appear to be locked in on the right side. make sure the printer is pluged in and on when you open the door they should slide over We had the same ...
...front door, if that don't help try to remove transfer belt from copier, then rotate gear on the side of transfer belt for 180 degree or less, put it back on copier and try to reset by opening ...
...remove it again and to the bottom left of where the fuser goes there is a black sensor make sure that is in position. Reinstall the fuser and shut the covers. Failing this there is a push switch that ...
Question about HP Office Equipment & Supplies
...hard to get to will need to remove fuser,front small square cover and prob exit cover ull see actuator and a long shaft which will lead u to a sensor.it will prob out of place or covered in
...front cover open/close switch. It's hard to locate it without service manual, but... if you manage to remove the plastic cover over the toner inlet then you will be able to see the hole where the ...
Question about HP Office Equipment & Supplies
remove paper from adf when there is no paper... no paper pieces and sensor seems to be freeley going up and down is there a way to reset the whole unit or something??? Clean the paper sensors and move
di450 errer cod c-0f24 COF24 - AIDC sensor contamination correction failure.Open the front door,remove(lossen 2 screw)the image unit,remove the drum and clean photosensor/LED of AIDC sensor.
Question about HP Office Equipment & Supplies
...you opened up the top cover, removed all the cartridges etc? Also paper can get stuck in the front door. The sensor in the front door behind the manual feeder can get stuck down in the wrong
...Any suggestion appreciated. Try resetting the copier, with the copier powered on open the front door remove small cover on right hand side press reset button close front door, the machine should ...
1,052 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions