Question about HP LaserJet Office Equipment & Supplies
...light, it indicates that something is wrong. The following is a check list of things to look at -The top cover isn't closed. Try lifting and closing the top cover -Make sure paper is loaded in the ...
...blue panel button to display a secondary light pattern. An error 50 is indicated by the ready and error lights with the blue panel button pressed. Turn the printer off for 15 minutes to see if the ...
...mean next to the triangle symbol. The printer will not work no mmatter what I try document.tlSearch.tx.value=unescape("") Insufficient power. Disconnect the power cord from any surge protectors or ...
...blue locking lever is locked down securely. Seven orange flashes: BJ cartridge (printhead) is defective Remove the BJ cartridge and check that the contacts on the cartridge and cartridge holder are ...
...blue light comes. After making noise it does not it does not take paper for printing. The BJC 3000 will flash two different colored lights in a pattern to signal several different errors. From the ...
all the lights are flashing When the status LED is flashing red, it means there is some minor error(i.e. the front door isn't latched shut, paper is jammed, etc) or the toner is getting low. Double ...
...blue, when I went to turn on my Epson R220, the power light comes on for a few seconds, the printhead moves around a bit and then the power light goes out and the ink and paper lights flash together. ...
...light continued to flash no matter what I did. But today, what I did fixed it. I opened the outside back "door" on the printer. Inside that, there is a black panel with a warning "hot" label on it, ...
...mean memory full or print overload, (pressing go button will start print of remaing data) Doc too complex or Door open front or back or even Clean Carona (blue slidy thing on drum) Drum light fix ...
549 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions
