...Tips...) helps tremendously. In conjunction with the correct service manual, (in your case, Combined Service Manual for HP LaserJet 4L / ML & 4P / MPHP Publication Number C2005-90988, August 1993), a ...
Question about HP Office Equipment & Supplies
...letter and the top edge of the envelope. Are you free hand addressing or are you using "Word - envelopes and labels" tool. It should be goof free. If you are, check the pull down rollers on that end ...
...cover and insert the tip of a pen or paper clip in the little button between the 3.0 volt battery door and the AA batteries. It is "printer reset" around the little hole. This should work. It works ...
Question about Office Equipment & Supplies
...this is a very comon problem,most people don't know how to take care of, now power on, open the cover until cartridge move and stopin the middle, then UN-PLUG (not turn off) the power cord,let
I tried to pull it out and found that it was doubled back. I had to take the small screw inside the cover off, just below the tape roller cartridge, take out the 6 batteries, take out the 4 screws and
...is actually a little pad on the end of a flexible piece of plastic that wipes off the glass that covers the Laser. Tip: When you are using it, you should apply a slight upward pressure on the end ...
...cover that goes over the Power On button switch, and Status Indicator lights, pops off. It comes straight up. I use a flat tip Jewelers screwdriver, and ease up the side, Opposite of the Power On ...
...cover and make sure that the ink tank contains ink. If it is out of ink, replace it. 􀁺 Ensure that all the orange tape of the ink tank has been peeled off. 􀁺 Press "PUSH" on ...
Question about HP LaserJet Office Equipment & Supplies
...tips from HP - nodifference. Someone posted a tip of removing the left (colour) cartridgeand this has allowed me to use the printer in black and grey scales, which is adefinite improvement. Sometime ...
...cover and insert the tip of a pen or paper clip in the little button between the 3.0 volt battery door and the AA batteries. It is "printer reset" around the little hole. This should work. It works ...
549 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions
