HP PSC 2410 All-In-One InkJet Printer "power cable" Questions

power cable of the printer and look for light indicator if theres a light indicator on the cable it means cable is roking fine (You can see the light indicator of the cable on the cable itself near on

...power cable and turn off the the unit. 2. Press and hold # & 3 at the same time with out connecting the power cable. 3.While holding the button,connect the power cable and do not the release ...

...although it can fit nicely to the 3 pin socket. Please advice, thanks. The power cable using is the normal 3 pin power chord used on computer. U need to check the power chord and the wall

...power cable from the back of the printer and from the walljack wait for 30 seconds then replug the power cable to the wall out let and then to the printer. Power Drain Remove the cartridges from the ...

...cable power. maybe the main problem is cable power already damaged. try to use another cable power that compatible or use tester to test your cable power is damaged or not. if the cable power not ...

power cable from backside of the printer and from wall outlet. Press and hold the Power button for 60 seconds. Connect the cable and turn ON the printer. Partial Reset Remove the power cable from back

...power cable or a power module as the power supply Step three: Reconnect the data cables and devices Press the Power button ( ) to turn off the product. Reconnect one USB, Ethernet, or parallel cable ...

power cable from backside of the printer and from wall outlet. Press and hold the Power button for 60 seconds. Connect the cable and turn ON the printer. Partial Reset Remove the power cable from back

...power cable. Hi, If the printer powers on and stays Idle with HP logo screen, you try reset the printer as below (try next step one after the other, if it doesn't fix) Power Drain: Turn OFF the ...